CORNERSTONE COATINGS INTERNATIONAL INC.
Toll Free:  1.866.878.7069
P.O. Box 479  Bruno, SK  CANADA  S0K 0S0


CURE AND SEALS
CORNERSTONE C309
Water-based Acrylic cure and seal

Cornerstone C309 is an economical All-Acrylic Polymer which is superior to the Co-polymer Resins used in other cure and seal products.  Cornerstone C309 has a VOC content of 70 g/l, is non-yellowing, low odor and surpasses ASTM C309 as a cure and seal.

CORNERSTONE C309
WATERBASED


CORNERSTONE R20
WATERBASED
CORNERSTONE R20
Water-based Acrylic cure and seal
Cornerstone R20 is a Thermoplastic All-Acrylic Polymer which is superior to the Co-polymer resins used in other cure and seal products.  Cornerstone R20 resists yellowing, provides a durable, long lasting shine, and minimizes hairline-checking, premature cracking, dusting and spalling.
Meets ASTM C309
ADVANCE CURE AND SEAL
Solvent-based Acrylic sealer

Cornerstone Coatings has incorporated "slow dry technology" in our solvent based cure and seal.  Advance Cure and Seal can be applied during the day in temperatures up to 27C.  VOC Compliant and meets ASTM C309 Type 1, Class B.  Cures concrete with 1 coat.
12% solids equivalent.
ADVANCE CURE AND SEAL
SOLVENT BASED
ADVANCE CURE AND SEAL 25
Solvent-based Acrylic sealer

Cornerstone Coatings has incorporated "slow dry technology" in our solvent based cure and seal.  Advance Cure and Seal can be applied during the day in temperatures up to 27C.   VOC Compliant and meets ASTM C309.   Cures concrete with 1 coat.  25% solids equivalent.
​​
ADVANCE CURE AND SEAL 25
SOLVENT BASED​​
PROTEC III LSF (WITH ACRYLIC MEMBRANE) 
Harden, densify and cure (ASTM C309) in one product

This product is integral to ensuring that new power trowel surfaces are cured properly by forming a temporary topical membrane that allows the concrete to retain the necessary moisture to properly cure. As a secondary process, the liquid silica fume technology strengthens any weak bonds that generally making up 25% of the concrete paste with its chemical reaction between the concrete and the liquid silica fume technology. This is the only product in the market that combines a harden and densifier with a membrane forming cure.

Protec III LSF (with Acrylic Membrane) helps stop shrinkage crack and curling and will help eliminate dusting and carbonation of concrete. There is increased chemical resistance and density for the top wear layer of the concrete slab. Meets LEED requirements.

PROTEC III LSF
WITH ACRYLIC MEMBRANE


Protec III LSF Chem RX is a waterbased highly
reactive penetrating concrete treatment, which
produce a permanent density change within the micro-structure of the concrete. As a cure, Protec III penetrates and reacts with the poor bonds in the concrete called calcium silicate hydroxide which make up approximately 25% of the cement paste.

​​When Protec III Chem RX chemically reacts with these weak bonds the result is strong bonds called calcium silicate hydrate
(CSH).

​​Overall hardening, tensile strength, low porosity and high chemical resistance is achieved.

​​Protec III LSF Chem RX has no harmful vapors, and it is Agriculture Food Approved for Registered Establishments.


PROTEC III LSF CHEM RX
The Original Chemical Cure​
PROTEC III LSF CHEM RX
WATERBASED​

ULTRA-LOCK 
Water-Based Sealer

​Ultra-Lock is the perfect product for concrete that is to be painted or coated since it enhances the bonding quality of the surface. Ultra-Lock will prevent peeling, cracking, and loss of bond caused by capillary moisture or internal chemical reactions (ph fluctuations).

​​
​​Ultra-Lock penetrates the concrete surface which chemically reacts with the free lime in the concrete and creates CSH (calcium silicate hydrate). When used as a cure, Ultra-lock works by filling the pores in the concrete which restricts moisture from escaping the concrete while the concrete is curing. Using Ultra-Lock also hardens, densifies and dust-proofs the concrete surface.


​​*Exclusive to Australia and New Zealand*

ULTRA-LOCK
Water-Based​